Philips 32PHS5301, User Manual

Page: 40 / 98

13
Sources
13.1
Switch to a device
From the list of Sources, you can switch to any of the
connected devices. You can switch to a tuner to
watch TV, open the content of a connected USB Flash
Drive or see the recordings you made on a connected
USB Hard Drive. You can switch to your connected
devices to watch their programme, a digital receiver or
a Blu-ray Disc player.
To switch to a connected device…
1 - Press

SOURCES to open the Sources menu.
2 - Select one of the item in the source list and
press OK . The TV will show the programme or
content of the device.
3 - Press

SOURCES again to close the menu.
One Touch Play
With the TV in standby, you can switch on a disc
player with your TV remote control.
To switch on both disc player and TV from standby
and start playing the disc immediately,
press

(play) on the TV remote control. The device
must be connected with an HDMI cable and both TV
and device must have HDMI CEC switched on.
13.2
Options for a TV Input
Some TV input devices offer specific settings.
To set the options for a specific TV input…
1 - Press

SOURCES .
2 - Select the TV input in the list and press OK .
3 - Press

OPTIONS . You can set the options for
the selected TV input here.
4 - Press

OPTIONS again to close the Options
menu.
Possible options…
Controls
With this option you can operate the connected
device with the TV remote control. The device must
be connected with an HDMI cable and both TV and
device must have HDMI CEC switched on.
Device Info
Open this option to view information on the
connected device.
13.3
Scan connections
To rescan connections and update the Sources menu,
press

Scan connections . (if

key is available
on the bottom of the screen.)
13.4
Game or computer
The device type determines picture and sound styles,
resolution values and other specifics. You don't have
to worry about the ideal settings.
For some devices the type of the device is not that
clear. A game console can have a built-in Blu-ray
Disc player and the type is set to Player because it is
used as a disc player most of the time. For this kind of
devices, you can temporarily switch to the ideal
settings for gaming. Or alternatively, switch to the
ideal settings for a connected computer.
You can only use the setting Game or
Computer when you switch to a connected device in
the Sources menu. The Game or Computer setting is
stored for the selected device.
To switch to the ideal settings for gaming or computer
manually…
1 - Press

, select Picture > Advanced and
press OK .
2 - Select Game or computer and press OK .
3 - Select Game , Computer or Off .
4 - Press

(left) to go back one step or
press

BACK to close the menu.
Remember to set this setting back to Off when you
stop playing the game.
40