6.2
Keyboard
Overview
Overview of a keyboard.
1
-
Character
Character position.
2
-
Shift
To type uppercase characters.
3
-
Ω Special characters
To open the onscreen keyboard to select accented
characters or symbols.
4
-
Fn
key
To type a number or punctuation character.
5
-
Spacebar
Enter a space.
6
-
Navigation
and
OK
Navigate through the menus, and confirm a selection.
7
-
Delete the character in front of the text cursor.
8
-
Share this
To share online what you are now watching.
Writing text
With the keyboard on the back of the remote control,
you can write text in any text field on screen. Turn the
keyboard facing upwards to activate the keyboard
keys. Hold the remote control with two hands and
type with both thumbs.
Enter text
• To enter text into a text field, select the text field and
start typing. Press
OK
to confirm the text.
Uppercase and lowercase
• To type an uppercase character, press the
(Shift) key just before you type the character.
• To type several uppercase characters consecutively,
press and hold the
key while typing.
• To type uppercase constantly, press the
key for
2 seconds to switch the keyboard in uppercase mode.
• To switch out of uppercase mode, press the
key
again. If no keys are pressed for 20 seconds,
uppercase mode turns off automatically. Also, if you
press another modifier key, like
Fn
or
Ω
, you switch
out of uppercase mode.
Numbers and punctuation characters
• To type a number or punctuation character, press
the
Fn
key just before you type the number or
punctuation character you need. You can turn the Fn
mode on or off as you would for the uppercase
mode.
Internet
• You can use the
Fn
key to enter
www.
or
.com
.
Accented letters and symbols
Accented characters and symbols are not directly
available on the remote control keyboard.
To type such a character, you can open the onscreen
keyboard.
To open the onscreen keyboard, press
Ω
. In the
onscreen keyboard, you can navigate to the character
you need. Switch the keyboard layout with the color
keys. Press
OK
to enter a character. The onscreen
keyboard disappears when you press a character on
the remote control keyboard.
Alternatively, you can enter special characters with
the remote control SMS/text keypad on the front of
the remote control.
6.3
IR sensor
The remote control of the TV uses RF (radio
frequency) to send its commands to the TV. With RF,
you do not need to point the remote control at the
TV.
However, the TV can also receive commands from a
remote control that uses IR (infrared) to send
commands. If you use such a remote control, always
make sure you point the remote control at the
infrared sensor on the front of the TV.
21
