Great user manuals database on
6.5 Devices
HDMI connections
• The HDMI-HDCP procedure might take a few seconds before the
picture from a device appears.
• If the TV does not recognise the device and there is no picture, try
switching from one device to another and back again to restart the
HDCP procedure. Or switch the device off and back on again.
• If sound interruptions occur persistently, see the user manual of the
device to check the output settings. If that does not help, connect an
additional audio cable.
• If a DVI to HDMI adaptor is used, check that an additional audio
connection is in place to complete the DVI connection.
EasyLink HDMI-CEC
• Check if the connected device supports the HDMI-CEC standard
and is properly set up. Read the user manual that comes with the
device.
• Check if the HDMI cable is properly connected.
• Check if EasyLink on the TV and device is switched on.
• Make sure that the System audio control in your HDMI-CEC audio
devices is properly set up. Read the user manual that comes with
your audio device.
PC display
• The refresh rate of a PC connected to the TV with VGA or DVI
to HDMI adapter should set to 60Hz.
• Check that the correct resolution mode is selected on your PC.
See the list in
Help
>
Specifications
>
Display resolutions
.
Troubleshooting / Devices
83
