EN 33
En
gl
is
h
To switch Teletext 2.5 on or off
1. Press .
2. Select
[Setup]
>
[TV settings]
>
[Preferences]
.
3. Select
[Text 2.5]
>
[On]
or
[Off]
, then
press
OK
.
Set locks and timers
Clock
You can display a clock on the TV screen.
The clock displays the time that is broadcast
by your TV service operator.
Display the TV clock
1. While you watch TV, press
OPTIONS
.
2. Select
[Status]
, then press
OK
.
The clock is displayed on the lower right
hand corner of the TV screen.
Change the clock mode
The clock mode is automatically
synchronised to the Coordinated Universal
Time (UTC). If your TV cannot receive UTC
transmissions, change the clock mode to
[Manual]
.
1. While you watch TV, press .
2. Select
[Setup]
>
[TV settings]
>
[Preferences]
.
3. Select
[Clock]
>
[Auto clock mode]
.
4. Select
[Automatic]
,
[Manual]
or
[Country
dependent]
, then press
OK
.
Enable or disable daylight saving
If clock mode is set to
[Country
dependent]
, you can enable or disable
daylight saving for your time zone.
1. In the
[Clock]
menu, select
[Daylight
saving]
>
[Daylight saving time]
or
[Standard time]
, then press
OK
. Daylight
saving is enabled or disabled.
Set the clock manually
If clock mode is set to
[Manual]
, set the date
and time manually.
1. In the
[Clock]
menu, select
[Date]
or
[Time]
, then press
OK
.
2. Use the
Navigation buttons
to make your
selection.
3. Select
[Done]
, then press
OK
.
Sleeptimer
Sleeptimer switches the TV to standby after
a specified time. You can switch off your TV
earlier or reset the sleeptimer during the
countdown.
1. Press .
2. Select
[Setup]
>
[TV settings]
>
[Preferences]
>
[Sleeptimer]
.
3. Press the
Navigation buttons
to set the
sleeptimer.
The sleeptimer can be set up to 180
minutes, in steps of five minutes. The
sleeptimer is switched off if it is set to zero
minutes.
4. Press
OK
to activate the sleep timer. The
TV switches to standby after the specified
time.
Child lock
To protect children from unsuitable TV
programmes, you can lock the TV or block
age rated programmes.
Set or change the child lock code
1. Press .
2. Select
[Setup]
>
[Channel settings]
>
[Child lock]
.
3. Select
[Set code]
, or
[Change code]
.
4. Enter the code with the
Numeric
buttons
.
Tip:
If you forget your code, enter '8888' to
override any existing codes.
Lock or unlock channels
1. In the child lock menu, select
[Channel
lock]
.
2. Enter the child lock code with the
Numeric buttons
. The
[Channel lock]
menu
appears.
3. Select channels to lock or unlock.
