Mechanical Instructions
4.
Figure 4-19 AmbiLight unit
4.3.11 LCD Panel
1.
Remove the rear cover, as described earlier.
2.
Refer to fig. “LCD panel“ below.
3.
Unplug the connectors on the Main Supply Panel [a] and
the LED & IR board [c].
4.
Unplug the outer connectors [d] from the mid-range
loudspeakers.
5.
Do NOT forget
to unplug the LVDS connector [e] from the
SSB.
Important:
Be careful, as this is a very fragile
connector!
6.
Remove T10 parker screw [b] that holds the Side I/O
module bracket.
7.
Remove T10 parker screws [f] of the central sub-frame.
8.
Remove LCD panel fixation screws [g] and lift the complete
central sub-frame from the set (incl. the PSU, SSB, and
Side I/O boards and wiring).
9.
Lift the LCD panel [7] from the front cabinet.
Figure 4-20 LCD panel [1/2]
H_17270_015.eps
060707
1
2 2
2 2
2 2
d
d
a
e
G_16860_067.eps
310107
c (1x)
g (2x)
f (3x)
f (2x)
f (1x)
g (2x)
b
