Philips 32PFL3330/V7, User Manual

Page: 15 / 28

4.10 Features Menu
•
[Back Light] : The backlight value
4.11 Parental Menu
•
1
Press
2 Select [Setup] > [Features]
then press OK
3 Select one of the following settings.
then press OK.
.
can be varied. This function used to
adjust brightness level of panel.
1 Press
2
Select [Setup] > [Parental]
then press OK
3
Select one of the following settings.
then press OK.
.
•
Press to move, and press to adjust.
• [Easy Link]: If you connect HDMI-CEC
•
[ARC] : This is used to control ARC feature,
compliant devices through HDMI,you
can control them at the same time with
your TV remote control.
Picture
Sound
Features
Installation
Child Lock
Parental
Picture
Sound
Features
Installation
Back Light
EasyLink
Parental Software Update
Reset
ARC
MHL
MHL CHARGING
LED Indicator
If set ARC to “On” TV sound will be deactivated
& ARC enabled HT sound will be activated
•
[MHL] : This is used to control MHL feature,
If set MHL to “On” mobile screen will be
Displayed on TV
•
[MHL CHARGING] : If set MHL charging
To On mobile can be charged through TV
Even if TV is in standby mode.
• [LED Indicator] : This is used to control
LED indicator status when TV is in standbby
Mode.
If LED Indicator is “ON” LED will glow when
TV is in standby mode & vice versa.
This option is for updating the software.
[Software Update] :
[Reset] : Reset to factory default settings.
2
3
Energy Saving
Picture
Sound
Features
Installation
Reset
Parental
[Energy Saving]: To save
power saving modes Off/low/Mid/ High/
Audio only Mode.
the power consumed by TV, select
•
After selection of Low/Mid/high energy
saving indication displayed on energy
meter by pressing info key of remote control
Low: After selection of energy saving
option to “Low”, approx.5% of rated
power will get saved.
Mid: After selection of energy saving
option to “Mid”, approx.10% of rated
power will get saved.
High: After selection of energy saving
option to “High”, approx 25% of rated
power will get saved.
Audio only : After selection of energy
saving to “Audio only ” panel power
switched off & only audio come
from TV sets which results in
power saved of approx 35%
Note
Press any key ( except Find, Text, subtitle
Vol +/- and Mute) to exit 'Audio only' mode
[Child Lock]: Enter the password, then
Note: Default password is “0000”
the following menus will open.
•
EN 13