Mechanical Instructions
4.
4.
Mechanical Instructions
Index of this chapter:
4.1 Cable Dressing
4.2 Service Positions
4.3 Assy/Panel Removal
4.4 Set Re-assembly
Notes:
•
Figures below can deviate slightly from the actual situation,
due to the different set executions.
•
Follow the disassembling instructions in described order.
4.1
Cable Dressing
Figure 4-1 Cable dressing
4.2
Service Positions
For easy servicing of this set, there are a few possibilities
created:
•
The buffers from the packaging (see figure "Rear cover").
•
Foam bars (created for service).
•
Aluminium service stands (created for Service).
4.2.1
Foam Bars
Figure 4-2 Foam bars
The foam bars (order code 3122 785 90580 for two pieces) can
be used for all types and sizes of Flat TVs. By laying the TV
face down on the (ESD protective) foam bars, a stable situation
is created to perform measurements and alignments.
By placing a mirror under the TV, you can monitor the screen.
4.2.2
Aluminium Stands
Figure 4-3 Aluminium stands (drawing of MkI)
F_15270_072.eps
260505
E_06532_018.eps
170504
E_06532_019.eps
170504
