Philips 32PF1700T/96, Installation And Operation Manual

Page: 129 / 140

Connecting video and audio signals
13
English
Connecting the S-Video input
Connecting the Component Video input
1. Connect the S-Video output of your output
equipment to the display's S-VIDEO
terminal using an S-Video cable (not
provided). Pay attention to the alignment
of the plugs on the S-Video cable when
inserting so as not to damage any pins.
2. Connect the corresponding audio output of
the output equipment to the AUDIO L/R
input terminals using a suitable audio
cable.
To view video image from this input, switch
the input source to AV .
You should not connect both a composite
Video and an S-Video from the same
device; just one or the other. If you have
the choice, use the S-Video instead of
composite Video as an S-video signal
provides a higher quality signal to that of
composite Video.
1. Connect the Component Video output of
your output equipment to the display's Y,
C
B
/P
B
and C
R
/P
R
terminals using a
Component Video cable (not provided). A
Component Video cable consists of three
plugs: Green (Y), Blue (C
B
/P
B
), and Red
(C
R
/P
R
). Ensure that the colours of the
plugs and terminals match when making
connection.
2. Connect the corresponding audio output of
your output equipment to the AUDIO L/R
input terminals on the display using an
audio cable (not provided).
To view video image from this input, switch
the input source to Component .
Of the analog video signal types,
Component Video offers the best quality.
See
"Supported Component Video/HDMI
input signal resolutions" on page 23 for
supported resolutions.
Audio cable
S-Video
cable
DVD
player
DVD
player
Component
Video cable
Audio cable
32PF1700T_96_Tuner-RC-EN.book Page 13 Thursday, April 26, 2007 5:35 PM