江南家电维修论坛会员专用！
http://bbs.520101.com
4.
4.3.10 Small Signal Board (SSB)
Caution:
it is mandatory to remount all different screws at their
original position during re-assembly. Failure to do so may result
in damaging the SSB.
Refer to figures “SSB connector plate” and “SSB removal” for
details.
1.
Unplug the LVDS connector [1].
Caution:
be careful, as
this is a very fragile connector!
2.
Unplug the connectors [2].
3.
Remove the screws [3] to release the board from the
connector plate.
4.
Remove the screws [4].
5.
Carefully lift the SSB at the top and take it out of the set.
Figure 4-12 SSB removal
H_17010_008.eps
180907
2
3
3
3
3
3
3
4
4
4
4
4
4
3
3
3
