33
This TV is capable of displaying 1080i, 720p and 480p DTV signals when
connected to a DTV tuner Set Top Box. Select the output of the Set Top
Box to either 1080i, 720p or 480p. A DTV signal must be available in your
area.
&
Connect the three separate component video cables
1
to the device
having component video outputs (YPbPr), such as Set Top Boxes, DVD-
players, laser-disc players, videogame players, satellite receivers or other
equipment, and to the
Y
,
Pb
and
Pr
jacks of
AV1
or
AV3
on the TV.
• Connect to the
Y
,
Pb
and
Pr
jacks of
AV1
in case of devices with
analog audio signals.
• Connect to the
Y
,
Pb
and
Pr
jacks of
AV3
in case of devices with
digital audio signals.
é
In case of a device with digital audio, connect the audio cable
2
to the
DIGITAL AUDIO OUT
of the device and to the
DIG. AUDIO IN
of the
TV or to your Home Cinema system.
In case of a device with analog audio, connect the audio cable to the
device’s
AUDIO L
and
R
3
jacks and the
L
and
R
audio jacks of
AV1
.
DVD / STB
2
1
DIGITAL
AUDIO
IN
3
AV1/AV3
YPbPr
AV1
L & R
DVD / STB
1
3
AV1
YPbPr
AV1
L & R
2
AV1
H & V
&
Connect the device with RGB output with separate Horizontal and
Vertical sync to the
Pr
/
R
Pb
/
B Y/G
input
1
jacks and to the
H
and
V
jacks of
AV1
2
.
é
Connect the audio cables to the
L
and
R AUDIO
jacks of
AV1
3
.
Notes
- If necessary, you can adjust the picture position to the center of the screen with
the cursor keys.
- The labels for the component video sockets may differ depending on the DVD
player or the device connected. Although the abbreviations may vary, the letters
B and R stand for the blue and red component signals, respectively, and Y
indicates the luminance signal. Refer to the DVD player’s or devices instructions
for use for definitions and connection details.
- This television is designed to accept high definition signal standards 720p and
1080i as specified by the Electronic Industries Association standard EIA770.3.
Digital devices from different manufacturers have the possibility of differing
output standards which may cause difficulties for the television to properly
display.
- Due to possible digital image distortion when displaying signals from connected
digital equipment, and when having selected Digital STB in the Source menu,
see p. 16, automatically the Auto picture setting
Soft
is selected, see Picture
menu, Auto picture, p. 19. Changing this setting during reviewing will not be
stored as
Personal
setting after switch off.
Warning
: in case you notice scrolling images, wrong colors or no color, no
picture, or even combinations of these on your screen, check if the connections
are done in the correct way or move your digital device further away from your
TV.
Devices with RGB output
DVD Player or other accessory digital source devices
Devices with Component Video Output Connectors (YPbPr)
