18
Tips
Poor reception
The proximity of mountains or high buildings
may be responsible for ghost pictures, echoing
or shadows. In this case, try manually adjusting
your picture: see "fine tuning" (p.6) or modify
the orientation of the outside aerial. Does
your antenna enable you to receive broadcasts
in this frequency range (UHF or VHF band)?
In the event of difficult reception (snowy
picture) switch the NR on the PICTURE
menu to ON. (p. 7).
No picture
Have you connected the aerial socket
properly? Have you chosen the right system?
(p. 6). Poorly connected euroconnector cables
or aerial sockets are often the cause of
picture or sound problems (sometimes the
connectors can become half disconnected if
the TV set is moved or turned). Check all
connections.
Peripheral equipment gives a black and
white picture
You have not selected the right socket with
the
N
key: S-VHS2 (S-VHS3) instead of
EXT2 (EXT3).To play a video cassette, check
that it has been recorded under the same
standard (PAL, SECAM, NTSC) which can be
replayed by the video recorder.
No sound
If on certain channels you re c e i ve a picture but no
s o u n d , this means that you do not have the corre c t
TV system. Modify the SYSTEM setting (p. 6 ) .
The surround speakers are producing no sound or
d i s t o rted sound ? Check that the active speake r
and the cordless setting are switched to the same
channel (p. 1 7 ) . Check also that the active speake r
indicator lights in green (see step 3 page 16) and
that the SURROUND menu is set to ON (p. 1 7 ) .
The remote control no longer works.
Check that the mode selector on the side of
the remote control is set to TV.
The TV set does not react to the remote
control; the indicator on the set no longer
flashes when you use the remote control?
Replace the batteries.
Standby
When you switch the TV set on it remains in
s t a n d by mode and the indication LOCKED is
d i s p l ayed when you use the keys on the TV set?
The CHILD LOCK function is switched on (p. 8 ) .
If the set receives no signal for 15 mins, it
automatically goes into standby mode.
To save powe r, your set is fitted with components
that give it a ve ry low power consumption when
in standby mode (less than 3 W ) .
Cleaning the set
O n ly use a clean, soft and lint-free cloth to clean
the screen and the casing of your set. Do not
use alcohol-based or solvent-based pro d u c t s .
Still no results?
If your TV set breaks down, never attempt to
repair it yourself: contact your dealer's after-
sales service.
°
Recycling
The materials used in your set are either reusable or can be recycled.
To minimise environmental waste, specialist companies collect used appliances
and dismantle them after retrieving any materials that can be used again (ask
your dealer for further details).
Summary of Contents for 28PW6315
Page 20: ......
