Service Modes, Error Codes, and Fault Finding
EN 30
EJ3.0U PA
5.
–
MCSUM=0x0000
–
=
7.
If you do not see the above info, restart the above
procedure, and check your HyperTerminal settings and the
connections between PC and TV.
8.
Via “Transfer” -> “Send text file ...”, you can send the
proper upgrade file to the TV. This file will be distributed via
the Service Organization.
9.
After successful programming, you must see the following
info:
–
DCSUM=0xECB3
–
:Ok
–
MCSUM=0xECB3
–
Programming
–
PCSUM=0xECB3
–
Finished
10. If you do not see this info, restart the complete procedure.
11. Close HyperTerminal.
12.
Disconnect and connect Mains/AC Power again.