3
2
3
Using the Remote Control
Pull out the plastic insulation sheet from the
battery to enable the remote control to operate.
Switching on the TV set
• To switch on the TV set, press the
POWER
button. A green indicator comes on and the
screen lights up.
• If the TV set remains in standby mode (red
indicator), press the
PROGRAM – / +
key on
the keyboard or the
P – / +
key on the
remote control.
4
1
Preparation / Getting started
Positioning the TV set
Place your TV set on a solid stable surface,
leaving a space of at 10 cm around the set.
Connections
• Insert the aerial plug into the 75
Ω
:
socket at the bottom of the set.
• Insert the mains plug into a wall socket
(220-240V / 50/60Hz).
• Ensure the power cord is fully inserted in
the TV mains socket and the wall socket.
Warning!
If the TV is mounted on a swivel base or
swivel arm, ensure no strain is placed on
the power cord when the TV is swivelled.
Strain on the power cord can loosen
connections. This may cause arching and
result in fire.
10 cm
10 cm
10 cm
–
.
–
Summary of Contents for 26PF3302
Page 1: ......
Page 2: ...4 1 2 3 ...
Page 3: ......
Page 30: ... 2006 Koninklijke Philips N V All rights reserved Document order number 3139 125 38481 ...
