Philips 26HFL5870D, User Manual

Page: 25 / 37

25
1
Insert the USB storage device into the
USB connector of your TV.
2
Enter the setup menu.
3
Press to select
[CLONING/
UPGRADE] > [CLONING].
4
Press to select one of the following
options:
[OPTIONS] : Selects the data to clone.
[ALL]
: Clones all data. This option
requires the longest time.
[SETTINGS]
: Clones TV settings and
channels list only. Select this option
if you do not need to clone icons. It
requires a shorter time.
[THEMETV IMAGE]
: Clones Theme
TV icons.
[MOVIE BAR IMAGE]
: Clones
Movie Bar icons.
[USB TO TV]
: Clones the data from a
USB storage device to a TV.
[TV TO USB] : Clones the data from a TV
to a USB storage device.
Note
Do not remove the USB storage device during
cloning.
All standard remote control functions and TV
controls are disabled during cloning.
•
•
Tip
Switch off the TV after cloning and restart it
for the changes to take effect.
•
Download software
You can download software upgrades or TV
settings from a USB storage device or an RF
channel.
1
Enter the setup menu.
2
Press to select
[CLONING/
UPGRADE] > [SW DOWNLOAD].
•
•
•
•
•
•
•
8 Clone data
and upgrade
software
This section describes how to clone the TV
configuration data and download software.
1
Enter the setup menu.
2
Press to select [CLONING/
UPGRADE] .
3
Press to select one of the following
options:
[CLONING] : Clones data from a
USB storage device to a TV or a TV
to a USB storage device.
[SW DOWNLOAD]
: Downloads
software from a USB storage device
or an RF channel.
[RESET]
: Resets to setup menu
default settings (including channels
list).
Clone data
You can copy the configuration data from a
TV to a USB storage device or vice versa. This
enables the installer to bypass the PBS setup
menu and configure multiple TVs by simply
using the USB storage device.
•
•
•
RESET
> SW DOWNLOAD
>
CLONING >
CLONING/UPGRADE
RESET
> SW DOWNLOAD
>
CLONING >
CLONING/UPGRADE
En
gl
is
h
EN