Philips 245P2EB/69, Service Manual

Page: 8 / 97

/RFN8QORFN$JLQJ)DFWRU\0RGH
To lock/unlock OSD FUNCTION(User Mode)
The OSD function can be locked by pressing"OK"button(1)
for more than 10 seconds, the screen shows following
windows for 4 seconds. Every time when you press"OK"
button, this message appears on the screen automatically .
Unlock OSD function
Unlocked OSD function can be released by pressing "OK"
button for more than 10 seconds again.
$FFHVV)DFWRU\0RGH
1). Turn off monitor.
2).
[Push "EXIT" & "MENU" buttons at the same time and
hold them]+[Press "power" button until comes out "Windows
screen" ]
=> then release all buttons
3).Press "MENU" button, wait until the OSD menu with
Characters "MERIDIAN 245P2 V2.1 2010-07-13” (below
OSD menu) come on the Screen of the monitor.
Factory Mode indicator
Factory Menu
Cursor can move on gray color area
Hot key function: by pressing " UP " and " DOWN " key
Simultaneously at User Mode (or Factory Mode) (PS: The Of
fset R G B function can be used on reduce or eliminate
snowy noise on the background when the resolution of video
signal is 1680*1050vertical 60Hz. Slightly increase or
decrease the value until snowy noise completely disappear .
$FFHVV$JLQJ0RGH
Step 1 : Access Factory Mode then enter Factory Menu.
Step 2 : By pressing " UP" and "
DOWN " key to Burning
Icon. Press "MENU then press " UP" and " DOWN " key to
turn on Aging Mode.
Step 3 : Disconnect interface cable between Monitor and
PC.
After 3 seconds,
bring up:
repeatly
Connect Signal cable again=> go back to normal display
8 245P2 LCD