Philips 230WP7, Service Manual

Page: 8 / 81

8
230WP7 LCD
Go to cover page
Item Attention Signals Display Time Condition
1 CANNOT DISPLAY THIS
VIDEO MODE, CHANGE
COMPUTER DISPLAY INPUT
TO 1920X1200 @ 60HZ 30 mins This warning appears when the input signal from your computer is not in a standard
video mode or is out of the monitor s scanning range. After 30 mins, monitor enters
sleeping mode.
2 NO VIDEO INPUT 30 mins This message appears when there is no signal input but with cable while AC or DC
power on. After 30 mins, monitor enters sleeping mode.
3 CHECK CABLE CONNECTION 30 mins This message appears when a signal cable is disconnected while monitor is
working. After 30 mins, monitor enters sleeping mode.
4 ENTERING SLEEP MODE 3 secs This message appears when monitor is about to enter power saving mode.
5 WAITING FOR AUTOMATIC
ADJUSTMENT Till auto
adjustment
finished This message is displayed when the auto adjustment button is pressed. It
disappears when automatic adjustments are
completed.
6 USE 1920X 1200 FOR BEST
RESULT On top of
OSD main
menu The message will show up at the top of the OSD main menu in red color when the
input resolution is not the 1920x1200.
7 OSD MAIN CONTROLS
LOCKED 3 secs / or Till
"OSD MAIN
CONTROLS
UNLOCKED"
appear This message will appear 3 seconds to indicate the OSD MAIN CONTROLS status
when to lock or un-lock it by pressing
MENU (OK) button for more than 10
seconds while there is video input from PC. This function provides the alternative
that user can lock all the OSD main control in case user do not want the FOS
performance setting to be changed, for instance,
during commercial exhibition.
8 OSD MAIN CONTROLS
UNLOCKED 3 secs This message will appear 3 seconds to indicate the OSD MAIN CONTROLS status
when to unlock it by pressing MENU(OK) button for more than 10 seconds while
there is video input from PC
9 The window of OSD
MONITOR SETUP 60 secs This message will appear when the OK button is pressed.
10 The window of BRIGHTNESS 60 secs This message will appear when the BRIGHTNESS button is pressed.
11 SELECTED INPUT NOT
AVAILABLE 3 secs This message will appear 3 seconds to indicate the SIGNAL SOURCE status when
change the signal source but it is not found while there is video input from PC.
" "
" "
" "
" "
" "
http://www.wjel.net