Philips 230WP7, Service Manual

Page: 15 / 81

15
230WP7 LCD
Mechanical Instructions
Go to cover page
1.Back view as Fig.1
Fig.1
2. Remove cable base as Fig2 and Fig.3
Fig.2
Fig.3
3. Use the thin"I" screw driver unscrew the screw and open the four
clicks simultaneously to remove the bottom base as Fig.4
Fig.4
4.Remove back cover as Fig.5 and Fig.6
Fig.5
Fig.6
Fig.7
5.Remove the shielding
Unscrew the screws
Unscrew the 2 screws and open the clicks on the sides
-Unscrew the screws and the pull down the shielding as Fig.8
Fig.8
6.Remove the power board and scaler board
-unscrew the screws and disconnect the connectors as Fig.9,Fig.10
Fig.9
Fig.10
7.Reomve the USB board
-Disconnect the connector and unscrew the screws as shown in Fig.6
http://www.wjel.net