Mechanical Instructions
4.
4.7
Assembly/Panel Removal (for 24"PHx5210)
Instructions below apply to the 24PHH5210/88, but will be
similar for other 24"PHx5210 models.
4.7.1
Rear Cover
Refer to
for details.
Warning: Disconnect the mains power cord before removing
the rear cover.
1.
Remove fixation screws [1] that secure the base assy, pull
out the base assy from the set. Then remove the fixation
screws [2] that secure the rear cover. Refer to
for details.
2.
At the indicated areas [3] the cover is secured by clips. Be
very careful with releasing those.
3.
Gently lift the rear cover from the TV. Make sure that wires
and cables are not damaged while lifting the rear cover
from the set.
Figure 4-32 Rear cover removal
19794_102.eps
2
1
1
2
2
2
3
3
