PrimeSuite xxHFL4373D/10
Page 30
8 Press
[Start]
to continue.
9 If a preset Network Frequency is not
available, or the Network Frequency
Mode is set as manual, Enter the
Network Frequency and press
[Done]
to
continue.
Press
[Cancel]
if no DVB-C to install
(only DVB-T and Analogue).
10 Once the channel list is configured, the
TV shows how many digital and analog
channels are captured and returns to the
TV Setup OSD.
11 Press
[Done] > [Skip] > [Finish] > [Close]
to return to the TV Setup Menu. If PBS Mode
is [On], the Guest menu is displayed.
More Channel Settings
1 Press
[Home/Menu] > [TV Setup]> [OK]
.
2 Select
[Setup] > [Channel settings],
then
press
OK
.
3. Select a setting to adjust and press
<OK>
:
•
[Languages]
: Set the required DVB
languages.
•
[Primary audio]
: Sets the Primary
audio channel to the selected country
language.
•
[Secondary audio]
: Sets the
Secondary audio channel to the selected
country language.
•
[Primary subtitles]
: Sets the Primary
subtitles to the selected country
language.
•
[Secondary subtitles]
: Sets the
Secondary subtitles to the selected
country language.
•
[Primary text]
: Sets the Primary text to
the selected country language.
•
[Secondary text]
: Sets the Secondary
text to the selected country language.
•
[Visually impaired]
: Sets the feature
Visually impaired to support:
[Off]:
[Speakers]:
[Headphones]:
[Sp headphones]:
•
[Preferred audio format]
: Sets the
feature preferred audio format:
[Standard]:
[Advanced]:
•
[Mono/Stereo]
: Sets the feature audio
format:
[Mono]:
[Stereo]:
Press
OK
to confirm your choice.
Channel installallation
Before starting to install channels specific
settings must be set to get the channels to be
installed (see reinstall, page 29)
1 Press
[Home/Menu] > [TV Setup]> [OK]
.
2 Select
[Setup] > [Channel settings],
then
press
OK
.
3. Select a setting to adjust and press
<OK>
:
•
[Channel installation]
: Configure the
proper installation settings:
•
[Automatic Channel Update]
: This TV
can automatically rescan the entire
channel configuration once every day if
this feature is set and the TV is in
Standby mode.
[Off]:
No automatic updating
[On]: At TV clock 5.00 AM channel
updating starts
•
[Channel Update Message]
: Once the
TV has updated its channel list due to an
Automatic Channel Update, this OSD
will inform about the occurrence
[Off]:
No updating message
[On]: After an update cycle an OSD
message will be displayed once the TV
is switched on.
•
[Digital: Reception test]
:
Test scan
Will install channels that are available in the
setted MUX frequency