29
[Headphone]
The default volume for headphones can be set.
The value define will be applied when the headphones are
connected.
[Factory default]
Restore the factory default of the PBS Menu.
Channel installation is not affected.
[TV Setup]
A shortcut to enter the consumer installation menu.
Consumer installation menu should be accessed to change e.g.
picture and sound settings and update channels.
Using this shortcut will trigger a popup screen which warns losing
settings in the PBS menu if you continue. Select discard if you want
to stay in the PBS menu or continue.
[Channel setup]
A shortcut to enter the channel grid.
Info: check Channel Options
In this grid you can reorder, rename and hide channels.
Using this shortcut will trigger a popup screen which warns about
losing settings in the PBS menu if you continue. Select discard if you
want to stay in the PBS menu.
[Installation]
This setting allows selecting which RF signal will be scanned during
channel installation.
Each entry [DVB-T/T2 – DVB-C - Analog] can be set to on (enabled)
or off (disabled).
[Store settings]
To confirm the changes in the PBS Setup
Menu, the changes must be stored.
1.
Select [Store settings] and press “OK” to store.
Note: TV will automatically reboot to apply changes.
2.
Select [Cancel] to discard any changes