Philips 224EL2SB/00 Service Manual Download Page 76

Page: 76 / 91

ʳ
ʳ

ʳʳʳʳʳ
ʳ
ʳ

ʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳʳ˃ˁ˄

241P3LY 24” Wide FHD LCD Monitor

2010/11/30 PHILIPS 26 of 33

241P3 LCD

General Product Specification

5.16 Product dimension / Weight (( Refer to Philips approved SHT

191/SHT560 ) )

Unit dimension 569.6*437.43*225.34mm

Packed unit dimension: L670 *W413 * H268

Net weight : 6.6kg

Gross weight :

9.3kg

5.17 Transportation

Transportation standards refer to UAN-D1534/00/01/02.

5.17.1 Transportation

packages

Ζʳ

Net weight Packaging and wrapping shall be sufficient to protect the

product against damage or loss during shipment from the supplier to the

destination specified in the purchase order. All packaging materials are

subject to test and evaluation per UAN-D1534/00/01/02.

Ζʳ

The cushion material shall be constructed using EPS material.

Ζʳ

The doggy hole is requested.

5.17.2 Transportation

Test

Ζʳ

The overall test refer to UAN-D1534/00/01/02.

Ζʳ

The test result should be passed by UAN-D1534/01 request.

Ζʳ

The test result of UAN-D1534/02 is for reference only.

Ζʳ

Vibration, drop test should be performed at ambient temperature(20°C to

C) and relative humidity (40% to 65% ).

A. Transportation test specification for all regions except China/India

Package

test

1. Random Vibration test

2. Drop test

3. Cold Drop test (for design reference)

Summary of Contents for 224EL2SB/00




























































































Search results

Summary of Contents for 224EL2SB/00

Reviews:

Related manuals for 224EL2SB/00

Brands by name

Popular brands

Philips 224EL2SB/00, Service Manual

Search results

Summary of Contents for 224EL2SB/00

Reviews:

Related manuals for 224EL2SB/00

Brands by name

Popular brands