
86 Meridian 1
The input signals are applied to the display through DVI-D cable.
Length
:1.8m +/- 50mm
Connector type
:D-VI-D male with DDC-2B pin assignments
White connector thumb-operated jack screws with transplant pin protective cover.
Pin assignments
PIN No.
Description
1
T.M.D.S. data2-
2
T.M.D.S. data2+
3
T.M.D.S. data2 shield
4
No Connect
5
No Connect
6
DDC clock
7
DDC data
8
No Connect
9
T.M.D.S. data1-
10
T.M.D.S. data1+
11
T.M.D.S. data1 shield
12
No Connect
13
No Connect
14
+5V Power
15
Ground (for +5V)
16
Hot plug detect
17
T.M.D.S. data0-
18
T.M.D.S. data0+
19
T.M.D.S. data0 shield
20
No Connect
21
No Connect
22
T.M.D.S clock shield
23
T.M.D.S. clock+
24
T.M.D.S. clock-
Timing
requirement
Factory Preset mode definition:
1. Perfect FOS while presenting all required timings
2. Required timing need to be specified in User’s Manual
User mode
1. Can be showed (not over scalar or panel spec.)
2. It needs to reserve the 22 timings space in memory size.
Mode storing capacity
Factory preset modes
: 11
User modes
:39
Note:
1. Screen displays perfect picture at factory-preset modes
2. Screen displays visible picture with OSD warning when input modes are the 22 reset mode