Regulatory Information
Please note that this device has been approved for non-business purposes and may be used in any environment, including
residential areas.
RETURN TO TOP OF THE PAGE
Polish Center for Testing and Certification Notice
The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All equipment
that works together (computer, monitor, printer, and so on) should have the same power supply source.
The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device in the form
of a fuse with a nominal value no larger than 16 amperes (A).
To completely switch off the equipment, the power supply cable must be removed from the power supply socket, which
should be located near the equipment and easily accessible.
A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of standards PN-
93/T-42107 and PN-89/E-06251.
RETURN TO TOP OF THE PAGE
North Europe (Nordic Countries) Information
file:///E|/LCD%20Monitor%20OEM/Philips/M1-project/220C1/220C1-ED...001/CD-Contents/lcd/manual/ENGLISH/220C1/SAFETY/REGS/REGULAT.HTM 第 6 頁 / 共 11 [98-06-24 08:52]
