Installation
Operating instruction
7
‘
Sound System
: use the
or
key
to select the desired sound system;
Auto
,
BG
,
I,
DK
or
M
.
(
Search
: Press
MENU
. The search starts.
Once a channel is found, the scanning
stops. Go to the next step.
If no picture is found, consult the possible
solutions (p. 14)
§
Channel
: enter the required channel
with the
,
or digit keys.
Fine Tune
: if the reception is not
satisfactory, adjust using the
or
keys.
!
Store
: Press
. The channel is stored.
ç
Repeat steps
(
to
!
for each channel
you wish to store.
0
To quit the menus, press
.
This menu is used to store channels one at a
time.
&
Press the
MENU
key.
é
With the cursor, select the
Install
menu
and follow by the
Manual Store
.
“
Colour System
: use the
or
key
to select the desired colour system;
Auto
,
PAL
,
NTSC 3.58
or
NTSC
4.43
.
Channel edit
This feature allows you to skip or edit
channels which have bad or weak TV signal or
channels you do not watch often.
Once a channel is skipped, you cannot have
access to it by the C or – key. You can
only access the channels by the digit (0-9) keys.
&
Press the
MENU
key. The
Main menu
is displayed on the screen.
é
With the cursor, select the
Install
menu
followed by the
Channel Edit
menu.
“
Enter into the menu and select the
channel number you wish to skip by the
digit keys.
‘
Then use the
key to select
Skipped
.
Use the
key to select
On
.
(
Repeat steps
“
and
‘
for each
channel you wish to skip.
§
To quit the menus, press
.
To restore skipped channels
&
Repeat steps
&
to
“
above.
é
Use the
key to select
Skipped
and
the
key to select
Off
.
“
Repeat steps
&
and
é
for each
channel you wish to skip.
‘
To quit the menus, press
.
(On screen display may differ from actual TV)
(applicable to certain TV models only)
Manual Store
p3-7
12/28/04, 10:52 AM
7
