7
Timer
This menu allows you to program the TV to automatically switch on with
the programme of your choice.
æ
Display the menu, select
TIMER
and then press
.
The
TIMER
menu appears.
Â
Select
SET CLOCK
and enter the time using keys
to
.
N.B.: Every time the TV is switched on the clock is automatically updated on the
basis of the teletext information in programme No. 1.
If the TV set does not feature teletext, this update will not occur.
ê
Select
START TIME
and enter the time at which you wish the TV to
switch on.
®
Select
PROGRAMME
and enter the programme number required.
†
Select
TIMER ACTIVE
and set to
ON
. (
OFF
to disable).
Ú
Press twice on the
key to exit from the menu.
If you now switch the TV set to standby (
key), it will automatically
switch on at the time programmed.
To cancel: Switch
TIMER ACTIVE
back to
OFF
.
N.B.:The programming will not function correctly if you use the on/off key on
the front of the TV to switch off the TV set.
Sleeptimer
Display the menu, select
SLEEPTIMER
and use the
key to enter
the length of time after which the TV will switch to standby mode
(up to 120 mins).
Press the
/
key on the remote control to display the length of time remaining.
Childlock
This menu allows you to lock the TV set and to disable access to certain
or all of the programmes.
N.B.: When a programme is locked, the search function is no longer possible
(the INSTALLATION menu is no longer accessible).
æ
Display the menu, select
CHILDLOCK
and press
.
The
CHILDLOCK
menu appears.
Â
Select PROGRAMME and enter the number of the programme you wish
to lock.To lock all programmes, select
ALL
using the
key (above
programme No.
0
) .
ê
Select LOCK and then YES.The screen turns black. Repeat operations
Â
and
ê
for each programme to be locked (maximum of 5).
®
Select
CODE
and enter your confidential 4 digit code.
†
Select
CONFIRM CODE
and enter the same code number again.
The
LOCK
menu is replaced by a
CODE
menu.
The TV set is now locked.The locked programmes are no longer visible: a
black screen appears with a
LOCKED
message.
To cancel:
Select
CODE
and enter your confidential number.
The
CHILDLOCK
menu reappears. Now repeat operations
Â
to
ê
by
selecting
LOCK
and then
NO
.
Ú
Press the
key to exit from the menu.
N.B.:The childlock will not function with EXT sockets that receive an RGB signal
(most game consoles).
Should you forget your confidential code, enter the universal code 8888.
