Philips 2100 Series, Manual

Page: 11 / 56

3 When the warning light flashes quickly, turn the control dial to the hot
water icon and wait a few seconds.
-
The warning light goes out and some water comes out of the hot
water/steam wand or automatic milk frother.
4 After a few seconds, when hot water stops coming out of the hot
water/steam wand and the warning light flashes slowly, turn the control
dial back to the single bean icon.
-
The machine is heating up and the on/off button flashes slowly.
-
When the machine has heated up, it performs an automatic rinsing
cycle to clean the internal circuit with fresh water. Water flows from
the coffee spout.
-
When the on/off button lights up continuously, the machine is ready
for the manual rinsing cycle.
Note:You can stop the automatic rinsing cycle by pressing the espresso
or the cappuccino button.
Note:The automatic rinsing cycle also takes place 60 minutes after the
appliance switches to standby mode or switches off.
Installing the water filter
We advise you to install the water filter as this prevents scale
build-up in your machine. You can buy the water filter separately.
For more details, see chapter ‘Guarantee and support’, section ‘Ordering
maintenance products’.
1
Remove the small white filter from the water tank and store it in a dry
place.
Note: Please keep the small white filter for future use. You will need it for
the descaling process.
2
Remove the filter from its packaging and immerse it in cold water with
the opening pointing upwards. Press the sides of the filter gently to let
out the air bubbles.
10
English