51
TPF1.3A LA
8. Alignments
Fig. 8
If there is a warring message coming as shown in Fig 12. , you
have to check the AC power, Video cable, or Novatek MCU.
Fig. 10
Fig. 11
Fig. 13
4
Press the file --> exit to end program , as shown in Fig. 11.
4) Turn off the monitor, exit the factory mode.
Fig. 14
3
Press the AUTO to running program , the firmware be updated
as shown in Fig. 9~10.
Fig. 12
Fig. 9
Factory Mode indicator
Factory Mode indicator
5 Check the firmware version
1). Turn off monitor.
2).
3). Press "MENU" button, wait until the OSD menu come on the
Screen of the monitor,You will find, after upgrade, the version
have already been changed as shown in
Fig. 13 and Fig. 14.
Press power "
" button.Then quickly push " + " and " - "of
Volume ,and hold this two buttons , then the screen comes out
"Waiting For Automatic Adjustment ",then the screen will be black
for one second untill comes out "Windows screen"] => then
release this two buttons.
[url=http://www.hqjdw.com/register.php?fromuser=乖乖狗]
红旗家电维修论坛，游客都可以下载资料[/url]
乖乖狗制作，严禁转载
http://www.hqjdw.com/?fromuid=乖乖狗