Philips 201B4 User Manual Download Page 10

Page: 10 / 130

201B Product Information

Active

Yes

Typical

104W

0 %

Green

OFF

Blanked

< 1W

99%

Yellow

This monitor is

NERGY

TAR

compliant.

s an

NERGY

TAR

artner,

PHILIPS

has

determined that this product meets the

NERGY

TAR

guidelines for energy efficiency.

RETURN TO TOP OF THE PAGE

Physical Specifications

• Dimensions

19.0" x 18.7" x 18.4" / 482 x 476 x 467 mm (including base)

19.0" x 17.2" x 18.4" / 482 x 437 x 467 mm (excluding base)

• Weight

23.5 kg

• Power supply

100-240VAC, 60-50Hz

• Temperature
(operating)

0° to 35°C / 32° to 95°F

• Temperature (storage) -25° to +65°C / -13° to +149°F

• Relative humidity

5% to 95%

* Resolution 1280 x 1024, standard size, contrast max., brightness 50%, 9300

, full white pattern.

* These information are subject to change without notice.

RETURN TO TOP OF THE PAGE

Pin Assignment

The 15-pin D-sub connector (male) of the signal cable (IBM systems):

file:///D|/EDFU/crt_19/edoc/english/201B/PRODUCT/PRODUCT.HTM (4 of 5)7/19/2004 4:10:37 PM

Summary of Contents for 201B4



































































































































Search results

Summary of Contents for 201B4

Reviews:

Related manuals for 201B4

Brands by name

Popular brands

Philips 201B4, User Manual

Search results

Summary of Contents for 201B4

Reviews:

Related manuals for 201B4

Brands by name

Popular brands