20” 3D Display User Manual
3D Solutions
01 April 2009
12 of 22
©2009 Philips Electronics Nederland B.V.
Note: When the display faces or shifts downwards after attaching it on the table stand, 2
screws in the table stand needs to be tightened further. One screw in the table stand can be
found from the top side and the other screw from the bottom side.
3.6
Fitting the Cosmetic front
The accessories box contains a cosmetic front plus 4 screws. Place the cosmetic front over
the display and fix the 4 screws in the holes (2 holes on the left and right side each). Only use
screws that are supplied with the accessories box.
3.7
Connecting the display
NEVER (dis)connect DVI when your PC or display is on.
PC
DVI cable
Power cord
DVI cable
2D monitor
(optional)
3D Display
A second 2D display may be connected to the PC. Only use a DVI cable and graphics card
that is compliant with the DVI standard (see reference to DVI standard in section 10).
Make sure the PC and Display are switched off!
1
. Connect the PC via the DVI cable to the DVI connecter.
2
. Connect the power cord.
