27
En
gl
is
h
8
In the rename channel menu, select
[Done]
, then press
OK
.
Rearrange channels
After you install channels, you can rearrange the
order in which they appear.
1
While you watch TV, press
FIND
.
The channel matrix menu is displayed.
2
Press
OPTIONS
.
The channel options menu appears.
3
Select
[Reorder]
, then press
OK
.
4
Select the channel to rearrange, then press
OK
.
The selected channel is highlighted.
5
Move the highlighted channel to its new
location, then press
OK
.
6
Press
OPTIONS
.
7
Select
[Done reordering]
, then press
OK
.
Test digital reception
You can check the quality and signal strength
of digital channels. This allows you to reposition
and test your antenna or satellite dish.
1
Press .
2
Select
[Setup]
>
[Channel settings]
>
[Channel installation]
>
[Digital:
Reception test]
, then press
OK
.
3
Enter the frequency to test, then press
OK
.
4
Select
[Search]
, then press
OK
.
5
When the channel is found, select
[Store]
,
then press
OK
.
Note
If the signal quality and strength is poor, reposition the
aerial or satellite dish and retest.
If you still have problems with the reception of your
digital broadcast, contact a specialised installer.
•
•
»
»
»
If you know the three-digit frequency
of the channel, enter it.
To search, select
[Search]
, then press
OK
.
3
When the channel is found, select
[Done]
,
then press
OK
.
To store the channel as a new number,
select
[Store as new channel]
, then
press
OK
.
To store the channel as the previously
selected channel, select
[Store
current channel]
, then press
OK
.
Step 3: Fine-tune analogue channels
1
Press .
2
Select
[Setup]
>
[Channel settings]
>
[Channel installation]
>
[Analogue:
manual install]
>
[Fine-tune]
, then press
OK
.
3
Press
to fine-tune the channel.
Rename channels
You can rename channels. The name appears
when you select the channel.
1
While you watch TV, press
FIND
.
The channel matrix menu is displayed.
2
Select the channel to rename.
3
Press
OPTIONS
.
The channel options menu is displayed.
4
Select
[Rename channel]
, then press
OK
.
5
To display the text input box, press
OK
.
6
For each character, select a character, then
press
OK
.
To select uppercase letters, lowercase
letters or symbols: In the row below
the space key, select the respective
key, then press
OK
.
7
When complete, select
[Done]
, then press
OK
.
The text input box closes.
•
•
•
•
»
»
•
»
EN
