Mechanical Instructions
4.
4.3.8
LCD Panel
1.
Remove the SSB as described earlier.
2.
Remove the PSU as described earlier.
3.
Remove the speaker as described earlier.
4.
Remove the stand as described earlier.
5.
Release the tape that fix the Keyboard Control cable near
the Keyboard Control panel.
6.
Remove the fixation screws that secure the LCD panel with
the bezel.
7.
Lift the LCD Panel from the bezel.
8.
Remove the fixation screws that secure the panel with the
Metal frame.
9.
Take the panel out. Remove the Flat Foil connector from
the panel.
When defective, replace the whole unit.
4.4
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position. See
and
•
Pay special attention not to damage the EMC foams on the
SSB shields. Ensure that EMC foams are mounted
correctly.
