Philips 19PFL3405H/05, Service Manual

Page: 11 / 59

Mechanical Instructions EN 11 TPM5.2E LA 4.
2010-Jun-25
Figure 4-3 Cable dressing (26")
4.2 Service Positions
For easy servicing of a TV set, the set should be put face down
on a soft flat surface, foam buffers or other specific workshop
tools. Ensure that a stable situation is created to perform
measurements and alignments. When using foam bars take
care that these always support the cabinet and
never only the
display. Caution: Failure to follow these guidelines can
seriously damage the display!
Ensure that ESD safe measures are taken.
4.3 Assembly/Panel Removal
Instructions below apply to the 19PFL3405H/xx, but are similar
for other models.
4.3.1 Rear Cover
Warning: Disconnect the mains power cord before removing
the rear cover.
1.
Remove the fixation screws that secure the stand at the
bottom of the stand. Then remove the stand.
2. Remove fixation screws [1], [2] and [3] that secure the rear
cover, see
Figure 4-4 .
3. The rear cover is secured with locking clips at the side and
top of the cabinet. Pull the rear cover from the TV. This may
require more than average force.
Be sure to oppose to
the stand support. Make sure that wires and flat foils are
not damaged while lifting the rear cover from the set, see
Figure 4-5 and Figure 4-6 .
Figure 4-4 Rear cover removal [1/3]
1 88 40_104_100 3 24.ep s
100 3 24
1 88 40_106_100422.ep s
100422
3
1
1 1 1
2