Philips 19HFL3340D, User Manual

Page: 25 / 56

EN-24
5�9 Listen to digital radio
channels
If digital broadcasting is available, digital radio
channels are installed automatically during
installation. To reorder the digital radio
channels, see Section 6.3 Rearrange the channels .
Press 1. OK on the remote control. The All
channels menu is displayed.
Use the number keys to select a radio 2.
channel.
Press
3. OK .
5�10 Update your TV software
Philips continuously tries to improve its
products and we strongly recommend that
you update the TV software when updates are
available. Check www.philips.com/support for
availability.
Check your current software version
Press 1. MENU on the remote control and
select Install
Æ
Current software info .
Update software (digital broadcasts)
If using (DVB-T) digital broadcasts, your TV
automatically receives software updates. If you
receive a message on-screen prompting you to
update your software:
Select • Now (recommended) to update the
software immediately.
Select
• Later to be reminded to update the
software later.
Select
• Cancel to exit the update (not
recommended).
6 Install channels
The first time you setup your TV, you are
prompted to select an appropriate menu
language and to perform automatic installation
of TV and digital radio channels (if available).
This chapter provides instructions on how
to reinstall channels as well as other useful
channel installation features.
Note
D
Re-installing channels modifies the All
channels list.
Note
D
The channel sequence can change during
installation. This TV accepts both digital and
analog broadcasting.
The following rules are used to arrange
channel numbers.
- Digital channel numbers range from
1 to 899. The sequence of channels is
determined by the broadcaster.
- Analog channel numbers range from 900
to 999.
- If digital broadcasting is not available,
analog channels number start automatically
from one. See the label “Digital TV Country
Compatibility” on the back of your TV to
verify whether your TV supports DVB-T in
your country.
To reorder stored channels, see Section 6.3
Rearrange channels.