English
- 9 -
OSD Disable
The default value is set as ‘
Disable Setup Menus
’ for hotel mode. You can block all menus by setting this
item as ‘
Disable All Menus
’.
Invisible Setup Menus are:
Main menu:
Installation, Channel list
Settings menu: Language, Parental, Sources, Other settings
Teletext
You can enable or prohibit the teletext services(or MHEG if available) by setting this item as ‘
On
’ or ‘
Off
’.
WakeUp Time Channel
Set the channel, whose time information is to be used for wakeup timer. If this option is set as “0”, time
information of the channel which is being watched will be used.
Note:
If hotel mode is active, ‘
Add
wake
up
timer
’ function will be available in ‘
Settings/Timers
’ menu. After
the new timer is saved, the TV will wake up automatically on desired time.
Wakeup Time Volume
Set the wakeup volume value of the TV. This value can’t be set as greater than the value in ‘
Volume
Limit
’
menu item.
Copy To USB (USB cloning)
You can copy the NVRAM data (service list, preferences, etc.) to a USB device using this option. Press
OK
to copy those files from TV to USB.
Copy From USB (USB cloning)
You can copy the NVRAM data (service list, preferences, etc.) from a USB device using this option. Press
OK
to copy those files from USB to TV.
Note:
USB device, which will be used for USB cloning functions, must be FAT32 formatted.
USB Option
Set as ‘
Off
’ to disable the USB ports on the TV.
Fixed Pic. Mode
Set as ‘
On
’ to disable picture setting menus.
Digital Tuner
Set as ‘
Off
’ to disable digital channels. When a digital channel is opened from the channel list, “no signal”
message will be displayed and digital channels will not be listed when manual or auto searches are performed.
Multiple RC Support
You can choose one of the predefined remotes or set as ‘
Off
’. You can set the RCU type from ‘RCU program
menu’. The shortcut of this menu is RETURN-1-2-3-4.
Welcome Screen
You can set a welcome screen image using this option. If this option is enabled a welcome screen message will
be displayed after turning the TV on. The image will stay on the screen until you press any key on the remote.
NIT Update
If this option is enabled LCN informations will be updated automatically. This option is available only for Nordic
countries.
High Security
If you set this option as
ON
, the Hotel TV menu will be accessible only via the Philips hospitality remote.
Reset to Default Values
Highlight this option and press the
OK
button on the remote to return the TV to default settings.
EPG Enabled/Disable
If you enable this option the EPG menu will be accessible while the TV is in Hotel mode.
