Philips 190S7, Service Manual

Page: 91 / 95

19” LCD Color Monitor 190S7
91
5.8 Plastic mold tooling
•
Tooling to be designed to minimize cosmetic defects induced by molding process (sink, blush, weld lines,
gate marks, ejector marks, etc.).
•
Painting to cover up cosmetic defects due to molding is strongly discouraged.
5.9 Plastics flammability
•
All Plastics to be Flame Retardant UL 94-V0 or Better (if monitor weighs less than 18kg; UL94-V0 is OK).
•
All major plastic parts (bezel, back cover, base) need to be molded from same resin.
5.10 Texture/Glossing of housing
•
The texture area and texture no should follow Philips make-up sheet.
•
The exterior surfaces shall have a uniform texture.
•
Philips must approve the mold texturing.
•
Detail document for texture refer to UAN-D249.
•
< = 20 gloss units
5.11 Tilt and swivel base
Tilt angle: -5
°
to +25
°
5.12 Label
Regulatory label / Carton label should follow Philips requirement.
•
Detail document refer to Philips Engineering Reference Book.
5.13 Product dimension / Weight
•
Unit dimension (incl. pedestal) : 424(W) * 417.4 (H) * 235 (D) mm
•
Packed unit dimension (carton) : 453 W* 486 H* 251 Dmm
(
for other regions
)
•
Net weight : 5.7Kg (Including I/F cable 240 g)
•
Gross weight : 7.6Kg
(
for other regions
)
•
5.14 Transportation
Transportation standards refer to TYE-M0002.
5.14.1 Transportation packages
Packaging and wrapping shall be sufficient to protect the product against damage or loss during shipment
from the supplier to the destination specified in the purchase order. All packaging materials are subject to
test and evaluation per TYE-M0002. The cushion material shall be constructed using EPS material.
5.14.2 Transportation Test
The overall test refer to TYE-M0002.
Vibration, drop test should be performed at ambient temperature (20°C to 23
o
C) and relative humidity (40% to
65%).
A. Transportation test specification for all regions except China/India
•
Package test
1. Random Vibration test