HUDSON 9
68
68
3.4 White
Color
Coordinates
6500
7300
9300
SRGB
x
0.313
0.302
0.283
0.313
y
0.329
0.318
0.297
0.329
Y
>150
>150
>150
>150
The measurement position is the center of the display (5).
Brightness, Contrast set to reset.
The tolerance of the color coordinates should be less than ± 0.030.
3.5 White
Color
Uniformity
The deviation to the white color coordinates at the 5 position 1….4 should not exceed ± 0.030 with respect to
the measurement at the position (5).
3.6 Purity
Purity is defined as the uniformity of the chromaticity of the three primary colors. The deviation of the color
coordinates of the primary colors red, green, blue at the 5 positions 1…4 should not exceed =0.030 with
respect to the measurement at the center position (5).
3.7 Response
The response time of the display depend on the panel specification.
CMO M156B1-L01 Panel: 8ms (typ. ON/OFF)
Refer to accessories one about the value, please.
The response time is measured from 90% to 10% (tr.) and from 10% to 90% (tf.) for a transition from white
(100%) to black (0%) to white (100%).
3.8 Viewing
angle
The viewing angle should be 90°
vertical for CMO M156B1-L01 Panel.
the bottom edge (normally 6 o’clock).
with respect to the 90° direction (AT CR>=10).
4. Standard Accessories (only for reference, according to the customer’s demand.)
4.1 Power
Cable
Type
Length
Color
Connectors
: IEC 320 female (straight plug)
: IEC 320 male (straight plug)
4.2 VGA
Length
: 1.5m + 10cm/-0cm straight plug
Color :
Black
Connectors
: Monitor-side
: 15-pin D-SUB
: PC side
: 15-pin D-SUB
4.3 Audio
Cable
Length 1800+/-30mm
Color Black
Connectors
3.5-mini jack with color on the both end heads.