Philips 150S7, Service Manual, Page: 81 / 94

15” LCD Color Monitor 150S7
81
1. FOREWORD
This specification describes a 15” wide SXGA multi-scan color TFT LCD monitor with
max. resolution up to 1024*768/ 75 Hz non-interlaced. All optical characteristics (including WHITE-D,
Brightness, and so on) are determined according to panel specification after warming up approximate 30
minutes that brightness stability is optimal, and follow strictly after panel specification.
2. PRODUCT PROFILE
This display monitor unit is a color display monitor enclosed in PHILIPS global styling cabinet, which has an
integrated tilt base.
2.1 LCD
Type NR. : LM150X8-TL03 (LPL),
Outside dimensions : 326.5(w)
∗
253.5(h)
∗
11.2(d) (Typ) mm
Pitch ( mm ) : 0.297 x 0.297mm
Color pixel arrangement: RGB vertical stripes
Display surface : low reflection, antiglare with hard coating
Color depth : 16M colors (8 bits)
Backlight : 2 CCFL‘s
Active area(WxH) : 15” diagonal
View angle : Horizontal ±65 Vertical +45º,-55º (CR>10)
Contrast ratio : 550:1(Typ.) 350:1(Min.)
White luminance : Original color 250 nits (Typ.)
Gate IC : OKI
Source IC : OKI
Response time : 8ms
Type NR. : QD15XL13-Rev.01 (QDI)
Outside dimensions : 326.5(w)*253.5(h)*11.0(d) (Typ) mm
Pitch ( mm ) : 0.297 x 0.297 mm
Color pixel arrangement: RGB vertical stripes
Display surface : low reflection, antiglare with hard coating
Color depth : 16M colors (8 bits)
Backlight : 2 CCFL‘s
Active area(WxH) : 15” diagonal
View angle : Horizontal ±60Vertical +45º,-55º (CR>10)
Contrast ratio : 500:1(Typ.) 300:1(Min.)
White luminance : Original color 250 nits (Typ.)
Gate IC : Novatek NT39320
Source IC : Novatek NT3994
Response time : 16ms
2.2 Scanning frequencies
Hor. : 30 – 63 KHz
Ver. : 56 - 76Hz
Video dot rate : 80MHz
Power input : 90-264 V AC, 50/60
±
2 Hz
Power consumption : < 23 W maximum
Functions:
(1) D-SUB: analog R/G/B separate inputs, H/V sync separated, Composite (H+V) TTL level, SOG
sync
(2) DVI_A: NA
(3) DVI_D: NA
2.3 Ambient temperature : 0
°
C - 35
°
C
3. Electrical characteristics