Recording with automatic switch-off
(OTR One-Touch-Recording)
1.
1.
Insert a cassette.
2.
2.
Use
or
to select the
programme number you want to record.
3.
3.
Press .
4.
4.
Each time you press
you will add 30 min-
utes to the recording time.
5.
5.
To stop recording, press
.
Preventing accidental erasing
All cassettes (except rental
and pre-recorded cassettes)
have a security tab on the
back of the cassette.
To prevent recording over
important recordings (eras-
ing), you can remove this
security tab.
If you later decide to record on a protected cassette,
simply cover the hole with adhesive tape or slide the
tab to the right.
Lining up recordings (assemble cut)
When you add a further recording to a cassette, which
already has a recording on it, a short blank (flicker)
can appear between the old and the new recording or
the picture itself can flicker. To help reduce these from
occurring, proceed as follows:
1.
1.
Find the tape position of the old recording where
you want to insert the new recording.
2.
2.
Look at the last minute of the old recording (play-
back).
3.
3.
Press
at the tape position where the
new recording is to go and press
.
4.
4.
Now start recording as usual by pressing
on the remote control.
5.
5.
Stop recording with
.
Selecting the recording speed (SP
or LP)
LP allows to double the recording duration on tape (for
example six hours instead of three hours on a E180
cassette).
1.
1.
Press
. The main menu will appear.
2.
2.
Select 'RECORD SETUP' with
and confirm with
.
3.
3.
Select 'RECORD SPEED' with
.
4.
4.
Select the required recording speed with
.
5.
5.
To end, press
.
Automatic controlled recording from
a satellite receiver (RECORD LINK)
This function automatically starts recording on the
switched-off TV-Video Combi when a video signal is
recognised through the connected scart cable. If your
satellite receiver has a programming function, the record-
ing will start automatically (as long as the satellite receiv-
er is switched on).
1.
1.
Press
. The main menu will appear.
2.
2.
Select 'RECORD SET UP' with
and confirm with
.
3.
3.
Select 'RECORD LINK' with
.
4.
4.
Select function 'ON' with
.
5.
5.
To end, press
.
6.
6.
Programme the satellite receiver with the
required information (programme number of
the TV channel, start time, end time).
If necessary, please see the operating
instructions for your satellite receiver.
7.
7.
Insert a cassette.
The
TV-Video Combi
is now ready to record. The
beginning and end of the recording is controlled via
EXT1 socket.
STATUS/EXIT
FWD
1
-
B
STOP
C
-
L
PLAY
B
-
K
FWD
1
-
B
STOP
C
-
L
PLAY
B
-
K
MENU
STATUS/EXIT
FWD
1
-
B
STOP
C
-
L
PLAY
B
-
K
FWD
1
-
B
STOP
C
-
L
PLAY
B
-
K
MENU
STOP
C
-
L
REC
I
REC
I
STILL
2
2
STOP
C
-
L
REC
I
REC
I
0..9
PROG P–
PROG P+
12
EN
SELECT
K L
CHOOSE
B
→
RECORD SPEED
[SP]
RECORD LINK
[OFF]
END=EXIT
'SP'/'LP' /'AUTO'
'SP': StandardPlay (normal recording speed) offers the usual
first-class picture quality.
'LP': LongPlay (half recording speed, double recording time).
6 hours can be recorded on a 3-hour cassette (E180) with a
somewhat reduced picture quality.
'AUTO': AUTOmatic Long Play. If there is not enough space
on the tape to record a programmed recording in standard
speed, the recording is automatically done in 'LP' (Longplay).
Otherwise, the recording speed will be 'SP' (Standardplay).
SELECT
K L
CHOOSE
B
RECORD SPEED
[SP]
→
RECORD LINK
[OFF]
END=EXIT
T6400EZ-UK(EN).qx3 03.2.20 2:57 PM Page 12
