9
General use
Your set may receive both TV programmes and FM radio stations.
The
j
key on the remote control is used to switch between TV mode
and radio mode.
TV mode
The TV programmes appear on-screen.
Radio mode
The television screen is off.The sound from the radio comes out of the
speakers on the left and right of the set.
Note: in radio mode, the
H
key gives direct access to a limited number of
settings and the
INSTALLATION
menu is specific to the radio reception.
TV mode
Use the
P
@ #
or
0 9
keys to select the programmes (from 0 to 59).
The number and sound mode are displayed for a few moments on the
screen.To compose a two-figure number using the numerical keys
0 9
,
add the 2
nd
figure before the hyphen disappears.
The title of certain programmes appears for a few moments at the bottom of the
screen.To view a programme that has been locked, enter the confidential code
(see p. 13).
Radio mode
Use the
P
@ #
or
0 9
keys to select the FM radio stations (from 1
to 40).The number, frequency and sound mode are displayed for a few
seconds before the screen goes blank.
List of radio stations
In radio mode, the
Ó
key dislays or clears the list of radio stations.You
can then use the
I
or
J
keys to change the station.
To change the page, select <> (using
I
) then press
K
or
L
to display the previous
or following pages. You can also modify how the stations are stored (see p. 7).
TV or radio mode
Press
|
to display for a few seconds or clear the programme number,
time and sound mode. In radio mode, the frequency of the station is also
displayed.
Permanent display of the programme number
Press
|
for five seconds to activate the permanent display of the
programme number. Press once to cancel.
a
π
°
◊
¬
RESET
SET
ALARM
ON/OFF
P
SMART
B
MENU
OK
e
È
é
c
L
I.S.
SMART
a
1
3
2
4
6
5
7
9
8
0
/
B
1
3
2
4
6
5
7
e
/
Z
Z
I.S.
RADIO
~
Choice of TV or radio mode
Selecting the programmes
Screen information
L9 1883.1 GB 1/8 15/11/00 13:10 Page 9
