background image

16

17

ENGLISH

Charging

 

  Charging, recharging or storing at 

temperatures below 40ºF or higher than 95ºF 

adversely affects lifetime of batteries.

 

  Always unplug this charging stand/Jet Clean 

System from the electrical outlet immediately 

after use, except when razor is (re)charging. 

You can store the razor in the charging stand 

or Jet Clean System (1160XCC only). 

 

  Charging or recharging requires one full hour.

 

  A fully charged razor has a shaving time of 

up to 50 minutes (models 1180X, 1160X and 

1160XCC) or 40 minutes (model 1150X).

 

  You may recharge when the bottom charging 

light blinks orange (model 1180X) or the plug 

symbol blinks (models 1160X, 1160XCC and 

1150X).

 

  Do not charge razor in a pouch.

Charging in the Charging Stand

C

 

1

  Connect the small plug of cord to charging 

stand.  Connect the power plug into any 

100V to 240V AC outlet.  Use only the 

power cord provided. 

 

  An adaptor plug may be necessary for power 

cord usage in some foreign countries.  Use 

an attachment plug adaptor of the proper 

configuration for the power outlet.

The power cord will automatically convert to 

work on 100V to 240V AC systems. 

 

ENGLISH

C

 

2

  Place razor in stand in an upright position 

(

1

).  Press the razor tightly into the holder 

making sure the charging contacts on each 

side of the razor fit into the holder (2). 

 

3

  The display on the razor will indicate razor 

is charging.

 

4

  Charging requires one full hour.  A fully 

charged razor has a cordless shaving 

time of up to 50 minutes (models 1180X, 

1160X and 1160XCC) or 40 minutes 

(model 1150X).

Charging Razor with Jet Clean 

System (1160XCC)

 

1

  Connect the small plug to the Jet Clean 

System.  Connect the charging plug into 

any 100V to 240V AC outlet.  Use only the 

charging plug provided.

The razor holder automatically moves up to the 

highest position.

C

 

2

  Remove protective razor head cap from 

razor. 

NOTE: The razor cannot be placed in the Jet 

Clean System when the trimmer or protective 

razor head cap is placed on the razor.  

3

  Place the razor head side down in the 

razor holder with the display facing the 

front of the Jet Clean System. 

 

1

2

Summary of Contents for 1150X/40





















Reviews: