Philips 107T417499 User Manual Download Page 12

Page: 12 / 109

This monitor is

NERGY

TAR

compliant.

s an

NERGY

TAR

artner,

PHILIPS

has

determined that this product meets the

NERGY

TAR

guidelines for energy efficiency.

RETURN TO TOP OF THE PAGE

Physical Specifications

• Dimensions

15.7" x 16.1" x 16.5" / 399 x 410 x 419 mm (including base)

15.7" x 14.7" x 16.5" / 399 x 373 x 419 mm (excluding base)

• Weight

16.5 kg

• Power supply

90 - 264 VAC, 50/60Hz

• Temperature (operating)

0° to 40°C / 32° to 104°F

• Temperature (storage)

-25° to +65°C / -13° to +149°F

• Relative humidity(storage)

5% to 95%

* Resolution 1280 x 1024, standard size, contrast max., brightness 50%, 9300

, full white pattern.

* These information are subject to change without notice.

RETURN TO TOP OF THE PAGE

Pin Assignment

The 15-pin D-sub connector (male) of the signal cable (IBM systems):

No.

Assignment

No.

Assignment

Red video input

No pin

107T Product Information

file:///D|/Rita/LF3/lf3manual/english/107T/PRODUCT/PRODUCT.HTM (8 of 9) [2002/7/7 ?? 11:12:28]

Summary of Contents for 107T417499














































































































Search results

Summary of Contents for 107T417499

Reviews:

Philips 107T417499, User Manual, Page: 12 / 109

Search results

Summary of Contents for 107T417499

Reviews: