Philips 107P5 Page 97 User Manual Download

Page: 97 / 138

The OSD Controls

7) To adjust the balanced pincushion, press the

button.Press

to confirm.

8) When the balanced pincushion is adjusted, press the

button to return to the ADJUST

SHAPE window. BACK TO MAIN WINDOWS will be highlighted.

9) Press the

button to return to the MAIN CONTROLS window, or press the

button until

ADJUST SIDE ANGLES is highlighted.

ADJUST SIDE ANGLES

ADJUST SIDE ANGLES under ADJUST SHAPE allows you to adjust two of the five preset options.
These two options are TRAPEZOID and PARALLELOGRAM. Note: use these features only when
the picture is not square.

1) Press the

button on the monitor. The MAIN CONTROLS window appears.

2) Press the

button until ADJUST SHAPE is highlighted.

file:///D|/EDFU/crt_17_5/edoc/ENGLISH/OSD_3/osd_cont.htm (11 of 26)2005-04-07 ¤U¤È 03:59:03

Summary of Contents for 107P5











































































































































Search results

Summary of Contents for 107P5

Reviews:

Related manuals for 107P5

Brands by name

Popular brands

Philips 107P5, User Manual

Search results

Summary of Contents for 107P5

Reviews:

Related manuals for 107P5

Brands by name

Popular brands