Frequently Asked Questions
Go to 'My Computer' and select 'Control Panel' followed by "Monitor Control". Select "All default selection"
and choose your Philips monitor model from the default driver list. Plug and Play will automatically enable
the EPA tick box for you. In DOS or Windows 3.1, you must first make sure your PC supports power
saving.
7. What is refresh rate?
"Refresh rate" describes the number of times an entire screen is vertically scanned each second. In other
words: If a monitor's refresh rate is 85 Hz, its screen is refreshed - or vertically scanned - 85 times per
second. A higher refresh rate means better image stability and less flicker. A high refresh rate helps users
who work long hours in front of a monitor avoid eye fatigue and stress. To change the refresh rate, go into
"Start/Settings / Control Pannel / Display / Properties / Setting/Advance/Adaptor" Windows settings of the
computer, the monitor will automatically adjust itself to the video card.
8. Why does the picture on the screen appear to flicker?
A low refresh rate or electrical interference typically causes flickering in the picture. Possible solutions
include the following:
●
Verify that the proper drivers are installed for your video card
●
Make sure that all electrical devices (such as mobile phones) are at least 1m from the monitor
●
Place the monitor in another physical location away from electrical interference
●
Adjust the refresh rate to 75hz or higher.
9. How do I adjust my monitor's resolution?
Available resolutions are determined by the capabilities of your video card and graphic driver. Under
Windows '95, you may select the desired available resolution through the 'Display properties/Settings'
menu.
file:///D|/EDFU/crt_17_6/edoc/english/FAQ.HTM (3 of 13)2005-01-12 ¤U¤È 05:24:06