background image

Aus ergonomischen Gründen wird empfohlen, die Grundfarben Blau und Rot nicht auf dunklem
Untergrund zu verwenden (schlechte Lesbarkeit und erhöhte Augenbelastung bei zu geringem
Zeichenkontrast wären die Folge).

Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 beträgt 70dB (A) oder weniger.

ACHTUNG:

 BEIM AUFSTELLEN DIESES GERÄTES DARAUF ACHTEN, DAß

NETZSTECKER UND NETZKABELANSCHLUß LEICHT ZUGÄNGLICH SIND.

 

RETURN TO TOP OF THE PAGE

End-of-Life Disposal

Your new monitor contains materials that can be recycled and reused. Specialized companies can recycle
your product to increase the amount of reusable materials and to minimize the amount to be disposed of.

Please find out about the local regulations on how to dispose of your old monitor from your local Philips
dealer.

(For customers in Canada and U.S.A.)

This product may contain lead and/or mercury. Dispose of in accordance to local-state and federal
regulations.
For additional information on recycling contact 

www.eia.org

 (Consumer Education Initiative)

 

RETURN TO TOP OF THE PAGE

Information for UK only

 

WARNING - THIS APPLIANCE MUST BE
EARTHED.

Important:

This apparatus is supplied with an approved
moulded 13A plug. To change a fuse in this type
of plug proceed as follows:

1. Remove fuse cover and fuse.

2. Fit new fuse which should be a BS 1362
5A,A.S.T.A. or BSI approved type.

3. Refit the fuse cover.

If the fitted plug is not suitable for your socket

 

Regulatory Information

file:///D|/EDFU/crt_17/edoc/english/107T/SAFETY/regs/regulat.htm (12 of 14) [2003/11/3 ?? 01:40:47]

Summary of Contents for 107B5




















































































































Reviews: