background image

Notes, Cautions, and Warnings

Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type.
These blocks are notes, cautions, and warnings, and they are used as follows:

NOTE: This icon indicates important information and tips that help you make better
use of your computer system.

CAUTION: This icon indicates information that tells you how to avoid either potential
damage to hardware or loss of data.

WARNING: This icon indicates the potential for bodily harm and tells you how to
avoid the problem.

SMART HELP: This icon indicates helpful information when adjusting the On Screen
Display of your monitor.

 

Some warnings may appear in alternate formats and may be unaccompanied by an icon. In such cases, the
specific presentation of the warning is mandated by regulatory authority.

 

RETURN TO TOP OF THE PAGE

©1999 Koninklijke Philips Electronics N.V.

All rights reserved. Reproduction, copying, usage, modifying, hiring, renting, public performance, transmission and/or broadcasting in whole or in
part is prohibited without written consent of Philips Electronics N.V.

 

About This Electronic User's Manual

file:///C|/rita wu/gs3noVE/english/105S/about/about.htm (2 of 2) [11/3/2000 1:13:06 PM]

Summary of Contents for 105S





















































































Reviews: