Frequently Asked Questions
Please perform the following to correct the picture image:
• A magnetic or electrical interference typically causes poor geometry in the picture. Place the
monitor in a different physical location.
• Reset the monitor to the factory preset via the OSD menu.
• Access the Geometry Menu in the OSD of the Monitor and perform the necessary
adjustments.
• Change the monitor timing to the recommended resolution.
32.
The picture appears too dim. How can I correct this?
Adjust Brightness and/or Contrast via the monitor 's OSD. Some models have a Video Input
Select
under Advanced Controls in the monitor 's OSD. Most computers require it to be set at 0.7V.
Please review the following for possible solutions:
• If the OSD menu is also dim, please contact service for repair.
• Reset the monitor via the OSD menu.
• Change the color temperature settings to 9300 color coordination via the OSD menu.
• Set the Contrast to maximum level (100) and Brightness to middle level (50).
Video card could be defective (try the monitor with another computer)
33.
How can I increase the color display of my monitor?
The amount of video memory your video card holds determines the amount of colors that can be
displayed on your computer screen. To get the most out of your video card, you will need to
either install the latest drivers onto your computer or upgrade the video cards memory. Please
check with your computer or video card manufacturer for further details.
34.
Why is there no picture on my monitor?
• Check the wall socket for power. Verify that there is power by connecting another product.
• Ensure the power cable is correctly attached to both the wall socket and the monitor.
• Check that the power button is switched on.
• Unplug the monitor for approx. 1 minute and plug it in again. Switch the monitor back on.
35.
Why is there no picture on my monitor even though the power LED is yellow/amber or
flashing green?
file:///D|/9305047/source/CD/multi_manual/ENGLISH/faq.htm 第 7 頁 / 共 8 2004/6/7 下午 12:12:14
