background image

1

E

N

Introduction

The 104E colour monitor displays sharp and brilliant images of text and
graphics with a maximum resolution up to 1024x768 pixels. It is optimal
for Windows, spread sheets, and any other application.

This monitor automatically scans horizontal frequencies from 30KHz to
54KHz, and ver tical frequencies from 50Hz to 120Hz. With
microprocessor based digital controlled circuit, the monitor can
automatically adjust itself to the video card’s scanning frequency and
displays an image with precise parameters you desire. The wide range
of scanning frequency supports variety of operating platforms, such as
IBM PC and compatibles, including Intel based platforms such as 386,
486, Pentium and Pentium II.

Feature Highlights

Global Styling demonstrates a soft & smart image.

Digital Control feature provides user-friendliness and ease-of-use
when operating the monitor.

Anti-Glare screen coating eliminate any bad effects caused by the
screen surface such as reflection of the room lights.

85Hz refresh rate:

The maximum display resolution is 1024 x 768 pixels non-interlaced
mode. The recommanded optimum resolution up to 800 x 600 pixels
non-interlaced by maximum 85Hz refresh rate.

DDC1/DDC2B allows communication between the monitor and PC
system for optimal video configuration.

Summary of Contents for 104E















Reviews: