46
ENGLISH
The machine performs the rinse cycle with a pre-set amount of water. The
machine may require to refi ll the tank many times if the necessary amount of
water has not been reached.
The following icon indicates that the tank needs to be refi lled. Once the tank
has been inserted restart the cycle by pressing the "
" button.
16
When the amount of water needed for the rinse cycle has been
completely dispensed or the water tank has been inserted again in the
machine, the icon on the side is displayed. Press the "
" button to
quit the descaling cycle.
17
The machine now carries out the warm-up and rinse cycle to prepare
for product brewing.
The descaling cycle is complete.
Note: The descaling solution must be disposed of according to the manufac-
turer's instructions and/or regulations in force in the country of use.
Note: After completing the descaling cycle, wash the brew group as described
in the "Brew Group" section in the "Cleaning and Maintenance" chapter.
After completing the descaling cycle:
- Remove the milk carafe and clean it as described in the “Weekly Clean-
ing of the Carafe” section.
- Empty the drip tray. Press on the side hooks to remove it.
Gr
een
Press the "
" button to access programming.
Programming
The user can change some of the machine operating parameters to suit
his/her needs.
Enter the “Menu”
The programming menu can only be accessed when the machine is in on.
1
1
2
Red
Red
CALC
CLEAN
.
.
.
.
Summary of Contents for HD8753/11
Page 4: ...2 1 31 32 21 22 20 17 19 23 18 1 2 3 11 10 12 13 14 4 5 6 7 8 9 24 27 15 25 28 26 29 30 16 ...
Page 56: ......
Page 57: ......
