Philips AVENT SCF862, User Manual

Page: 24 / 178

26
ENGLISH
Problem Possible cause Solution
Blended food
result is not
good enough. Blending is not
enough. Blend the ingredients for a few more
times. Do not blend continuously for
more than 30 seconds at a time.
Ingredients are
not sufficiently
preprocessed. Ingredients need to be washed,
peeled and cut into small cubes no
bigger than 1cm before you steam
and blend.
Too few or too
much food volume
to blend. Increase or decrease food volume
for appropriately blending.
Steaming time is
not sufficient. Add correct amount of water for
sufficient steaming time. Refer to
the “Ingredients and steaming time”
chapter.
The ingredients
are dry and stick to
the wall of the jar
during blending. After steaming, no need to pour out
the water collected in the jar. Mix it
with the steamed food for blending.
If you use blending function only
(without steaming), add suitable
amount of drinking water in jar,
mix with food ingredients before
blending.
The appliance is
noisy, produces
an unpleasant
smell, is hot to
touch, emits
smoke, etc. There is too much
food in the jar. Switch off the appliance and process
a smaller quantity.
The jar lid is not
closed properly. Place the jar lid on the jar and close
it securely.
You have been
using the blending
function for too
long. Do not let the appliance blend
continuously for more than
30 seconds at a time.
There are white
spots on the
water tank and
water tank lid. There is limescale
buildup on these
parts. This is normal. Remove the
limescale periodically. Clean the
water tank lid and jar lid with a moist
cloth. Descale the water tank. Refer
to the "Descaling" section in the
"Cleaning and descaling" chapter.