Philips AVENT SCF396, Manual

Page: 8 / 238

- Clean and disinfect all parts before first use and after each use.
- Do not use antibacterial or abrasive cleaning agents to clean the
breast pump parts as this may cause damage.
- Wash your hands thoroughly with soap and water before you
touch breast pump parts and breasts to prevent contamination.
Avoid touching the inside of containers or lids.
Warnings to avoid breast and nipple problems including pain:
- Do not use the breast pump if the silicone diaphragm appears to
be damaged or broken. See chapter ‘Ordering accessories’ for
information on how to obtain replacement parts.
- Only use accessories and parts recommended by Philips Avent.
- No modification of the breast pump is allowed. If you do so, your
warranty becomes invalid.
- Never use the breast pump while you are sleepy or drowsy to
avoid lack of attention during use.
- Always switch off the breast pump before you remove the pump
body from your breast, in order to release the vacuum.
- If the vacuum is uncomfortable or causes pain, switch off and
remove the breast pump from your breast.
- Do not continue pumping for more than five minutes at a time if
you do not succeed in expressing any milk. Try to express at
another time during the day.
- If the process becomes very uncomfortable or painful, stop using
the pump and consult your healthcare professional.
Warnings to prevent damage and malfunction of the breast pump:
- Portable radio frequency (RF) communications equipment
8
English
(including mobile phones and peripherals such as antenna cables
and external antennas) should not be used closer than 30
cm
(12 in) to any part of the breast pump, including adapter. This
could have a negative effect on the performance of the breast
pump.